ACS2 servo drive controlled by motion (EtherCAT CoE): Power up error

[JimmyWan]

Hello,

I use ctrlX Motion (EtherCAT CoE) to control Le-AutomatiX ACS2 servo drive.

When click power, the drive is actually powered up and goes into “run” mode without error, but motion report error:

From CoE Online data monitoring: we can see control word 0x6040 is set correctly, and drive feedback right status word 0x6041 without any error or toggle. Driver has no problem, so I think there is some problem with the Motion app reading drive status!

Please see attached detail information and deice xml file.

[LuisCtrL]

Hello colleague,

There is another post with a similar problem :

https://developer.community.boschrexroth.com/t5/ctrlX-MOTION/Errors-when-starting-the-motion-app/m-p...

try to set up the datalayer value for the diagnostic units to true to get more information :

[JimmyWan]

Hi,

Thank you for your reply!

I have checked all the similar issues on forum, but I do not the problems in these topics, so I start the new ticket.

Please see my attched "ACS2 Motion .docx".  In this document, I think I have provide all the necesary inframtion including set up the datalayer value for the diagnostic units to true.

If you need more information, please let me know! Thank you!

[CodeShepherd]

Sorry for the late reply. I will again try to find more information that can help you.