About Drives_Uwe

Drives_Uwe · ‎05-07-2020

In a double axis drive as well the first axis may have a 2nd "EC" encoder. Means: - both axes always have the digital encoder interface present to allow the evaluation of AcuroLink encoders present at MS2N motors - both axes have an additional multi-encoder interface for each axis if ordered with option "EC" at type code field 20 and 21 - 1st axis incorporates an additional multi-encoder interface if ordered with option "EC" at type code field 22 and 23 Only two of these encoders may be functional for each of these axes.

Drives_Uwe · ‎05-05-2020

Is the function 'force absolute encoder evaluation' available on the ctrlX drive? (S-0-0277 bit 8))?

Drives_Uwe · ‎04-02-2020

In the very moment this is not foreseen. In a double axis the safety option is always valid for both axes. Recommendation: Use single axis drives to differentiate the safety options for the single axis.

Drives_Uwe · ‎03-27-2020

If ctrlX DRIVE plus is used with ctrlX CORE the engineering takes place via routing over the Engineering port of the core. If ctrlX DRIVE is used with 3rd party control systems an EoE device has to be used or the mechanisms like ADS interface on e.g. Beckhoff controls.

Drives_Uwe · ‎03-25-2020

The new unique functions smart energy mode and power factor correction will be available in all our regenerating power supply units XVR. The functionality is similar to the today already existing functions in IndraDrive ML (HMU amplifiers). See firmware functions in firmware PSB21.

About Drives_Uwe

Re: encoder interfaces

Force absolute encoder evaluation

Re: ctrlX Drive - DoubleAxis - is it possible to have STO Option T0 and SMO Oprion M5/M8 i...

Re: Engineering Port ctrlX DRIVE

ctrlX DRIVE regenerating power supply units XVR: smart energy mode and power factor correc...