About BRamos

BRamos · ‎07-14-2023

Hi @WEMO_MPA, From what I understand what you need is indeed the "Start Type": Monitored. Then, on the properties of the Start/Reset Button you have to check the property "Use for Monitored Start Up". Then you need to link them in the Functional scheme like this: Let me know if this helps. Best Regards, BRamos

BRamos · ‎07-13-2023

Hi @WEMO_MPA, Can you please let us know the SAFEX-C.1x Firmware Version and ctrlX SAFETY Engineering Version that you are using? I can see from the screenshot that you have Diagnostics open at the time you're trying to connect. Can you try to Connect with Diagnostics closed? @AllAutomationand @Dias, did this already happen to you? Best Regards, BRamos

BRamos · ‎07-10-2023

Hi @bclapperton, Are you trying to connect with an empty project? ctrlX SAFETY Engineering 1.7.1.8239 crashes when trying to connect with a SAFEX-C.1x if no device is present on the project. Best Regards, BRamos

BRamos · ‎06-29-2023

Hi @KomEa, Are you using SAFEX-C.1x Firmware 1.0.1.29? If yes I would recommend to reach out to Bosch Rexroth support as the "Generation Report" should be stable on these versions.

BRamos · ‎06-27-2023

@KomEa, You can find the newst releases on the Collaboration Rooms: https://www.boschrexroth.com/de/de/myrexroth/collaboration/collaboration-rooms/ If you don't have access, please reach out to Bosch Rexroth Support. Best Regards, BRamos

About BRamos

Re: SAFEX-C.12 and SAFEX-C.15 OSSD Light Curtain Functionality

Re: SAFEX-C.15 USB-Connection Abort with HP Zbook

Re: Can't connect to Safex C.12 with USB

Re: Error when generating report

Re: Error when generating report