About AndreasL

since

yesterday

New Contributor

I've attached a IndraWorks 15 export with a function block for reading and visualizing the lightpipe colors.

It seems it's not possible to read that parameter via the AT as its not avaiable in S-0-0187.0.0. Is this by design or just a misstake?

Hello, A customer asked how to mirror the lightpipe function of the drive in their hmi. I've tried to find a parameter that shows the current lightpipe color without success. It is documented in the manual wich color means what, but seems like reinventing the wheel. Anyone has done this in some way?

Okey, maybe you are using IndraWorks Ds or IndraWorks Engineering, but the same points about three connections apply.

We are comissioning a machine that is using C1300 and C0600. According to the manual the torques should be limited by this parameter when C1300 and C0600 is active: But it isn't: As you can se in the picture above, C1300 is active, S530 has the value of 25% but the actual torque is 40.1 Using firmware 03V12

Likes given to

User

Likes Count

1

1

1

Likes From

User

Likes Count

1

1

1

1

1