Scan drives with profinet master communication

[POUL]

Hi

The system is 8 CtrlX drives (FWA-XD1-AXS-V-0308N-NN.03 | XMS2-W0006ANN-01AETT0NNNN) with Profinet as master communication and at simens PLC as Profinet Master.

scan drives from CtrlX drive engineering (CtrlX WORKS WRK-V-0120) then the list of drives are random sorted. I wil ask for screen dump.

[CodeShepherd]

Do I guess right that you are using a CODESYS communication extension as Profinet master? Moved the topic to the corresponding dub forum "CODESYS - PLC Add-ons".

Could you add at least add a screenshot of what behaviour you are encountering and tell us the versions of the used apps and CODESYS addon?

[POUL]

No - only single drives with profinet interface and no Corr. I send a screendump when I get it.

[POUL]

[CodeShepherd]

So to clarify:

ctrlX DIRVE is set to ProfiNet fieldbus communication and all connected to a ProfiNet master controller.

Where is you PC connected to in this scenario? Is there some routing via the control?

Which order is expected by your side?

[POUL]

 The PC is connected via a switch on the ProfiNet network.

as the first - that the sequence is the same every time and does not change.

But otherwise IP address or name

[CodeShepherd]

So just to wrap this up, there is no communication issue or similar. Only the sorting in the ctrlX DRIVE Engineering is changing and so confusing in your opinion. I will ask for the reason and see if it can be changed.