Setup WR21 with Codesys WebVisu

[r0b0shubham96]

Hi,

I’m new to PLC programming and am currently trying to design an HMI using Ctrlx Codesys and Webvisu. I have obtained the Webvisu license, but I cannot find any documentation on how to display the HMI or set up the WR21 with the Ethernet port for display. Can someone assist me with this as I am a complete beginner?

Additionally, I encounter an error when I run Webvisu on my local machine. Any help would be greatly appreciated.

[stefanAT_ctrlX]

Hello,

in the How-To is one entry:  https://developer.community.boschrexroth.com/t5/Store-and-How-to/Collection-of-how-to-videos-blogs-a...    Search there for WebVisu    -> Find this:  https://developer.community.boschrexroth.com/t5/Store-and-How-to/Creating-an-HTML5-Control-for-ctrlX...

reagrding WR21: here is a thread:  https://developer.community.boschrexroth.com/t5/ctrlX-HMI/First-Use-WR21-and-WebVisu/m-p/77698

Regards, Stefan

[Sgilk]

@r0b0shubham96 ,

If your PLC application is running, you should be able to access the visualization via port 8080.

https://192.168.1.1:8080/webvisu.htm in your case.

[shubhamrexroth]

Thanks

[stefanAT_ctrlX]

And you tested with the port 8080 as Sgilk wrote ?

The problem is also from another PC instead of WR21 ?

[shubhamrexroth]

Hi , It worked out on my loacal pc/machine. I can share the setup of PLC to HMI. I cannot display on HMI. 

 

[stefanAT_ctrlX · Accepted solution]

But the WR21 must have an different IP-adress then the ctrlX CORE !     Does the CORE has different then 192.168.1.1   ?

[shubhamrexroth]

Ctrlx Core has IP of 192.168.1.1

Here's settings on HMI : 

[stefanAT_ctrlX]

Then the Ethernet-Port of the WR21 has to be different in the same subnet.  example: 192.168.1.5

[shubhamrexroth]

Hi,

Thanks for all the help. It worked out now. 😁