FORUM CTRLX AUTOMATION
ctrlX World Partner Apps for ctrlX AUTOMATION
04-11-2022 11:49 AM
hello:
for MKE motor:
the motor connectors is the SUP-M04-XXX
but what connectors does it have on the CTRLX -Drive
and what cables does it have apart from the cable glands
thank you
Richard
Solved! Go to Solution.
04-12-2022 10:35 AM
Please use the cables for IndraDrive, leave them untouched at the motor side and just change the connectors on the ctrlX DRIVE side.
04-25-2022 10:52 PM
Hello Richard,
ATTENTION:
Please note the comment of "macmotor" inside the following chat: https://developer.community.boschrexroth.com/t5/ctrlX-DRIVE/ctrlXdrive-with-MKE-hyperface/m-p/52538
Kind Regards
04-28-2022 01:41 PM
For MKE in ATEX-version the OEM has to choose the cable glands and suitable cable on his own, depending on the specs for the application and/or machine and the local regulations on the site of operation.
Since the cable gland is an individual ATEX device with own certification and specs, one would usually choose this part first and then define a suitable cable, probably with the help of the cable gland manufacturer. Choosing both components is responsibility of the OEM.
Bosch Rexroth Sales can provide some basic product information and hints on the issue, but BR cannot approve or testify, which cable is suitable for whatever cable gland and the specs of the application.
As of today ctrlX DRIVE and MKE can only be used with an external ATEX-certified PTC switching device, but such switches are not in the BR scope of delivery.