Reference of paramter P-0-0383

[alink]

Hello,

I'd like to calculate an average energy consumption of drives.

To avoid too much complexity, I'd like to use parameter P-0-0383. With this parameter there is the energy consumption since comissioning. But this is a addition of consumption over the whole lifetime and less useful. To get a more useable value this should be devided with working duration time.

But there are two times:

P-0-0190 for controler - time (power on time +24VDC)

P-0-0191 for time with power on (power on time 3x230VAC)

More interesting is time with power on. But which reference is P-0-0383 using, complete time from P-0-0190 or power on time P-0-0191?

But first there is another issue: How to read out P-0-0383 in PLC it seems it is not available.

Thanks in advance

[alink · Accepted solution]

OK, meanwhile I found another parameter which is available in PLC, P-0-0819.

If I'm right, than this is energy consumption just when power on (3x230VAC) and not with controler power (+24VDC).

But I wonder, why is P-0-0383 available in IndraWorks / ctrlXDrive but not in PLC?