CoDeSys WebVisu issue

[8run0tti]

Dear ctrlX Community!

In a PLC project, after activating the WebVisu, the HMI content is available via the usual 8080 port. But after a reboot, the 8080 port does not answer anymore, but the HMI content is appears on the 80/443 port, so the ctrlX Core web interface is no longer available.

Could You recommend a solution to this issue?

Thanks in advance!

[georkueh]

Please check the call of the Web Visu is done by http://ip-address/8080 and the web UI of the core is done by https://ip-address. Additionally please clean your browser cache before calling the web UI (e.g. by  pressing ctrl + F5).

kind regards

[TheCodeCaptain · Accepted solution]

There is a bug in the Codesys Web Visu.

We are working on it.

Related posts:

https://developer.community.boschrexroth.com/t5/CODESYS-PLC-Add-ons/WebVisu-started-on-port-80-norma...

https://developer.community.boschrexroth.com/t5/CODESYS-PLC-Add-ons/CtrlX-always-open-webvisu-issue/...