About Usalas

Usalas · ‎05-29-2024

WebView works well but can not open Virtual assist since does not support WebGL. also does not like much iframe from webvisu. kicks you out and starts the coundown again

Usalas · ‎05-29-2024

Using WR21, updated to RC7, load WebView as well. Chromium shows a message that WebGL is not supported by the browser when trying to open Virtual assist, same error on WebView app. Enable hardware accelerator on Chrome and did not help. Any assistance will be appreciated. Thanks

Usalas · ‎05-23-2024

Hello, CtrlX drives FW: XD1-AXS-V-0404NNN Panel FW: XD1-PAN-V-0116 Backup works fine, we can generate the .par files. None of the backup options seems to backup the Drive FW into the panel. Maybe that is not that intent. The problem is that when we need to restore the parameters back into the drive. To restore it asks for a Drive FW file which normally users do not have. what is the correct process here? If we load the FW files works well, and the restore process does load the FW again to the drive. ideally we do not want the FW to load which also takes time.

Usalas · ‎05-15-2024

Running V2.04, Are we planning to have Kinematic Cyclic channel option similar to MLC? I see we have Axis Cyclic channel option for but not Kinematics. Thanks in advanced. Ulises @aFouraker

Usalas · ‎04-02-2024

Good Morning, They try to access the XM controller thru a NAT Router. Allen Bradley 1783-NATR. they will move their machine to another plant but need to have access remotely. They need full access to controller and PLC. So far they can Ping the controller and access web assistance thru the NAT device. but it fails during authentication when trying to connect thru Indraworks. we tried several ports. some in imaged below

About Usalas

Re: Workaround for delaying startup of HMI on WR panels

WR21 Browser does not support WebGL - Virtual Assist

CtrlX Drive Panel Backup Restore Functions

Kinematic Cyclic Channel

Re: NAT to XM42