About ericvergara

ericvergara

Hello Peter, Do you know when the WR will support WebGL? If not is the VR3/4 Panel PC compatible with WebGL? Thank you beforehand

ericvergara · ‎08-28-2024

Hello, We have an application with two XCS that are controlled by an Omron through Ethercat CoE, We are using the Sysmac Studio software and the official ESI .xml, The problem is that when we try to add a cyclic parameter the software does not allow us and I do not know if it is a Sysmac Studi" problem as I am not very experienced with it or a problem of the .xml itself, Have someone experienced this before? Thank you,

ericvergara · ‎08-02-2024

Hello, We have a customer with two ctrlX Drives FW0404 that are controlloled by an Omron PLC through Ethercat CoE, We have checked the parameters and from time to time we are having the E2092 warning, I attach the screenshots of the Omron PLC side and I have also checked this post: https://developer.community.boschrexroth.com/t5/ctrlX-DRIVE/Ethercat-E2092-that-leads-to-a-F4002/m-p/89240#M1192 I saw that you need to configure the shift time, but in the screen of the Omron it seems that is blocked? Does someone have experience with Omron and our ctrlX Drives before? Thank you,

ericvergara · ‎07-25-2024

Hello Michael_A, I have already changed this parameter but now I am getting this error: All the devices seem to be in OP I attach the system report,

ericvergara · ‎07-23-2024

Hello, FW 0504

About ericvergara

Betreff: WR21 Browser does not support WebGL - Virtual Assist

Cannot add cyclic parameters in the Sysmac Studio Software?

E2092 in an Omron PLC

Re: Cannot switch to "Running" configuring a ctrlX Drive in CoE with FSoE

Re: Cannot switch to "Running" configuring a ctrlX Drive in CoE with FSoE