About GustavoTaffarello

GustavoTaffarello · ‎11-15-2023

Hello dear CodeShepherd, Thanks for your kind reply. It turned out that by simpling flashing again the image 2.2 on the CORE made it work fine. I really dont know what happened on the first time I tried. Anyway, eveything is working fine now.

Drives_Uwe · ‎11-04-2023

Unfortunately this is not possible. Use a power supply device in order to create a 24 or 48 V DC voltage. Then you can make the ctrlX DRIVE amplifiers work in inverter mode. Set DC bus voltage threshold to 20 or respectively 40 V. Set P-0-0118 Bit 15 to „1“!

Yacine · ‎10-27-2023

Hello, TTL Support is still planned for the end 2023 ? for which firmware version ? if the the customer has already the ctrlx Drive with EC option, only a firmware update could allow him to get TTL support ? Thanks.

FranzClt · ‎09-04-2023

Hello The limitation is the number of programmed axes in the CNC program. If you have a gantry with the basic function block electronic gear, you only need to program in the CNC the master axis and then you can have many slave axes greats

tommorassini · ‎07-11-2023

This fixed the problem for me. Thank you!!

About GustavoTaffarello

Re: ctrlX DRIVEplus upgrade (AXS-V-0404) and (XCR to 2.2.1)

Re: XCS2 with 120Vac single phase

Re: TTL Encoder option on CtrlX-Drives VRS-03

Re: CNC : gantry axes and DNC function

Re: Codesys Softmotion with IndraDrive Cs