About GustavoTaffarello

GustavoTaffarello · ‎11-15-2023

Hello dear CodeShepherd, Thanks for your kind reply. It turned out that by simpling flashing again the image 2.2 on the CORE made it work fine. I really dont know what happened on the first time I tried. Anyway, eveything is working fine now.

GustavoTaffarello · ‎11-03-2023

Hello dear community members, We've just got few ctrlX DRIVE demo kits from Germany (pn: R911418966) and I am wondering here if there is way to move the axis from bb to Ab with 120Vac as the mains single phase. The drive has AXS-V-0404 firmware and I am trying to have the Ab as soon as it jumps to OM (with DC Bus charged). I can see that the mains peak voltage feedback is there, but the mains frequency (S-0-2016) remains at 0Hz. I have also tried using the IOs at the XG31, but no success. Should I force some "reserved" bit somewhere? Are other parameters (like P-0-0860) that I should force just to test here in Lab? No high speeds and no load. I am also attaching the parameter file here.

GustavoTaffarello · ‎10-31-2023

Hello dear CodeShepherd, Thanks for the kind reply. Here is the info: From the ctrlX CORE: Material number: R911176525 Serial number: 7260418026766 Type code: LK CX-CPU01-07-SMT-RJ45 From the Drive: Controller: XMS2-W0023AN-02X3TONNET-S0404N2NNNN0NN : 7260415123456 (SN) and R911123456 (PN) and AA1 (HW) Control Section axis: CUS2-02X3-T0NNET-NN : 7260418026766 (SN) and R911410005 (PN) and AC5 (HW) Before the update: XCR: 1.12 Drive: AXS-V-0308 The upgrade was done first on the Drive via panel and then ctrlX CORE via microSD at the CF01. After the drive update, I had control section defective (but I assumed was simply a incompatibility with the CORE v1.12). Here is the screenshot of the apps. Thanks so much!

GustavoTaffarello · ‎10-31-2023

Hello dear community member, Just wanted to poke your brains for a moment. Have you ever upgraded your CtrlX DRIVEplus with embedded CORE? I have upgraded the Drive to AXS-V-0404 and the CORE to 2.2.1. I can access the Drive via USB-C cable and jog the axis (no problem), but using the CtrlX I/O Configurator (V2.2.1), the EtherCAT Master can no longer find any EtherCAT Slave. I really don’t know if the Master Communication ports of the drive got defective after the upgrade to the latest version of firmwares. Is there any incompatibility with the current hardware I have in hands (too old hardware for such new runtimes) ? Please, check the screenshot below. Thanks! 😊

GustavoTaffarello · ‎08-16-2023

Hello folks, Just two quick questions here regarding our Codesys SOFTMOTION CNC package: 1) I know that we have 4 axes limitation per kinamatics, but I would like to know how many axes per gantry within a kinematics. Example: can I have 4 axes and the X-axis a dual drive? 2) Does our Codesys SOFTMOTION CNC package has the Distributed Numerical Control (DNC) feature available? Thanks

About GustavoTaffarello

Re: ctrlX DRIVEplus upgrade (AXS-V-0404) and (XCR to 2.2.1)

XCS2 with 120Vac single phase

Re: ctrlX DRIVEplus upgrade (AXS-V-0404) and (XCR to 2.2.1)

ctrlX DRIVEplus upgrade (AXS-V-0404) and (XCR to 2.2.1)

CNC : gantry axes and DNC function