Hello, We have a project in which we use a CtrlX Core with the Ethercat app, PLC and OPC UA. The application is a Pick to Light and has two PCs as HMIs with Winstudio as OPC UA clients. We are using WinStudio v7.4 Service Pack 2. The communication of variables between PLC and HMI works correctly. The problem arises when we turn the machine off and on, the computers start the WinStudio application much faster than CtrlX (about 15 seconds), I think before all the snaps start. The CtrlX ends up starting but only the Ethercat and PLC application work. The HMI does not communicate, and the configuration Web display does not go beyond the Login screen (it goes very slow and gives a error 502). We have to turn the Core off and on and start up with the HMIs disconnected (Ethernet cable). If we connect them later, once the Core is on with the green Led it works correctly. I have tried it with two different CtrlX and it gives the same problem. Any idea why this might be happening? It's a problem because delaying the PCs power up with how long it takes for the CtrlX to boot is a problem (over a minute). Thanks in advance for the help.
... View more
