About CDSAddons

CDSAddons

So, we try to understand the procedure correctly: If a project was saved with a set of Static Analysis rules and the project is then opened in another Codesys Engineering IDE without this Static Analysis add-on (or the license for it) you get a build error. If so, this is not understandable or to be reproduced in a default environment - the SA rules/settings are not saved in the project, only those that are already available in the Static Analysis Light version will be shown in such a case. This should not cause any problems. Please share your project and describe the specific error you see and the exact steps you took to reproduce the problem. Which SA version are you using? Which IDE version are you using for your test?

Milo112

Hi guys, It is great to receive news from you. I have just tested the setup a different way again and it works. I connect to the ctrlX through XF10 (192.168.1.133) for engineering and connect the ctrlX with S7 through XF51 (192.168.2.144), without any router or switch in between. I believe my Office Switch has some protocols that limit the connection since it is also a Wi-Fi router. One main thing is that I must set up different IP layers for the XF10 (192.168.1.133) and XF51 (192.168.2.144). I configure them as 192.168.2.XXX before, so there must be some conflicts. However, it is strange since my colleague uses the same setup with the same model of the switch, and it works while the 2 devices are connected to it. I will check again whether which settings on the switch I should change or modify. Thank you so much for your time and support. Best regards, Thinh

PADE · ‎05-30-2024

Hi, I face same issue so if it could be updated soon it would be great! Can I have two more questions regarding alarm group: - If you delete some msgs, the IDs are also deleted and never re-sorted. Is there function to re-number ID from 1 and keep incrementing by 1 till end? We have alarm management where my array index corresponds to msg and if some IDs missing it´s difficult to assign correct msg and latch variables. - Is there any chance to implement feature that Latch variables of numeric data type (e.g. Int, word) could be represented by Text list as well? It´s quite common in other HMI sw and it would make creation of msgs much easier. Thanks a lot.

CodeShepherd · ‎05-07-2024

Moved:

Moved to own topic.

FranzClt · ‎04-15-2024

You can send it to franz.stamm@boschrexroth.de i will distribute the data

About CDSAddons

Re: PLC Engineering Building Bug

Re: PROFINET: Connect ctrlX CORE X3 to PLC S7-1200

Re: WebVisu AlarmGroup requires Clean or full download to Update

Re: CODESYS visu How to reset trace and trend graph?

Re: Different position when switch off / switch on the machine working with Softmotion