The Address is Already Used

[EngJay]

I was using the PLC Datalayer_Realtime feature 'Select realtime data' -> 'selectively from the core' to add status words and dc bus control word for multiple drives. 

As you can see in the screen shot below, I get the errors ctrlX_DRIVE_XMD_SoE_1_2_FSoE_7: The address %IW224 is already used and ctrlX_DRIVE_XMD_SoE_1_2_FSoE_7: The address %IW226 is already used.

There seems to be a bug where the address locations are not properly auto-assigned and for some reason at this point it reuses the address location of ctrlX_DRIVE_XMD_SoE_2_2_FSoE_6.

I'm using PLC Engineering version 2.4 and attached the version info for reference.

[CodeShepherd]

Sorry for the late reply.

Did you try a clean all of the project to get rid of any artifacts?

We are currently reworking the address ordering mechanism because of problems with special third party modules. And as I could not reproduce the problem, could you do a test with version 2.06 coming up end or March and see if it working there?

[EngJay]

If memory serves, I did try to clean all, but I will review to be sure.  For now, of course, I was able to manually assign an open address.  I will look to test again with 2.06 in March and update the post.  Thanks.