Message "DEBUG" in ctrlX drive with safemotion

[Pinball_NL]

I am wondering why I have the Message "DEBUG Safemotion" in my safemotion SMO M5.

This is in Firmware 03V16.

In 03V08.04 we do have the normal message "drive integrated  safety technology"

Why DEBUG is shown here ?

[Drives_Uwe · Accepted solution]

"Debug" is always shown if you use special ctrlX DRIVE hardware using the so called "debug bridge". This allows the test of preliminary, non-certified "Safe Motion" functions.

Normally this is only relevant for Bosch Rexroth staff and special customers in certain B- sample conditions.

This applies as well when the firmware release was not officially released for "Safe Motion" which is in here the case for firmware AXS-V-0316. Please use either the broad sales versions AXS-V-0308 or AXS-V-0402.

[Pinball_NL]

Thank you very much. Now I understand it.

The last official release (right now) is 03V08.04, and we have that. But for test purposes we also have the 03V14 and 03V16.

Its good to know that you can see that also here in the Debug message, so you be aware that you use the test / Beta version.