how to implement oscilloscope feature for EFC5610 using the Mini USB port?

[yaxccha]

hello, colleagues

I try to implement an easy configuration tool for EFC5610 for Chinese customers using the Mini USB port, and I find the SIS communication protocol, though the document is very old, I test it, it works fine to read and write parameter.

but now, I would like to implement the oscilloscope feature, e.g. trending mode and trigger mode, just like the Indraworks DS, but in the previous document, I cannot fine any introduction for this.

From my point of view, the sampling rate is as fast as 1 ms for trending mode, so I have to read one packet of data samples one time, in my experience with EAL, it is quite simple to implement oscilloscope feature according to the SDK document. but in this case, I cannot use the Ethernet port, so I don't know how to deal with this oscilloscope feature ?

could any colleagues give me some suggestions? many thx

[yaxccha · Accepted solution]

thanks to the colleagues from XiP.

according to the advice from colleague, I checked the drive help of INDRV*-MPx-20VRS from Indraworks, and searched the key word of 'Oscilloscope' and found all the parameter description which will be used in the oscilloscope development. then I got the real parameter list from XiP colleague, then everything seems to be easy.

also, I attached the file here for reference.