profinet/ethernet ip communication (COREX-M-X3)

[ANLH]

Hi everyone

I want to communicate with a Rexroth Profinet drive and communicate a plc with Ethernet IP protocol, using the module (COREX-M-X3).

If you can help me I would appreciate it

[CodeWasi]

The X3M version with additional right-side added Ethernet port can support the wanted fieldbus-device by loading the propriete app on the ctrlX. 
PN_Device App is available at the store. 

Examples to setup the PNDevice.PNDevice HowTo_1 , PNDevice_HowTo_2 .

The App for EtherNet/IP is under delevopment and will be released soon. 

Aboves info describe the principle to operating the fieldbus-functionality by loading an additional app that realizes the feature on the right-side connected module with XF23/24. 

We can support fieldbus functionality integrated by Codesys packages into the PLC-Application. 
Further info regarding the usage are listed here . 

Does the answer cover your question? 

Bye

[ANLH]

Hi

PN_Device App is not available in the store for download.

I have read the information shared, but I can't figure out how to develop the application I need.

From what I understand profinet communication must be configured, but the side I want to communicate with ethernet/ip how do I develop it?

[AndreasL]

As I understand you want the core to be an EtherNet/IP™ Device under an external PLC and an ProfiNet Scanner for talking to drives under the core?

In that case its enough with a X3 (not modular) and the CodeSys communication packages:

https://developer.community.boschrexroth.com/t5/Store-and-How-to/CODESYS-Fieldbus-Communication/ba-p...