About Marc_Smaak

Thank you this is a good tip, did not know that.  ... View more

I always do this trough the configurations. If you have a core with an empty Node-Red you can store the configuration and download the ZIP file. When opening the ZIP file with 7zip you can remove everthing except the Node-Red part. When you upload such a configuration to the other CORE you overwrite the Node-Red config. No need to re-install Node-Red. Reboot is required. This is what I keep in the ZIP The same whay I am deploying Node-Red flows on multiple cores. I understand that in future we can use the Setup app for tis but have not experienced with it so far.  ... View more

Sorry by bad, I still had a fixed IP configured in my network range for the Virtula core. After removing the inside out does work so I can connct for the virtual core shell to a local server on my network. Also the Node-Red flow does connect to the public MQTT server so indeed Internet connectivity is in place ... View more

@TheCodeCaptain  Thank you for your answer. Good to know the core is connected trough NAT I did not realize this but I guess it is obvious since we need port forwarding. As said I can connect to the core with the host IP address from the host (192.168.88.154) This works both for the web-interface and ssh using the fowarded ports. However if I try to connect to the core from another device in my network using this same IP address I get no response. I suspect this is the firwall at my IDE WIn10 VM 😣 Hover if I try to connect to another server on my network through ssh from the Virtual core controller shell it also does not work With pure NAT I do expect this works??? I tried you nodered flow too and it does not connect to the public server so it still seems there is a problem. Would it be better to use the Tap Adapter setting? ... View more