About Mr_SafeMotion

Mr_SafeMotion · ‎04-12-2023

Hello TPF factores are documentated inside the ctrlX DRIVE project plan manual (version 11) , chapter "mains voltage" of the individual ctrlX DRIVE components For example: https://docs.automation.boschrexroth.com/doc/1019091048/xcs-w0100-w0120/latest/en/?sel=Awel5AmSQRisIBsIAsjTsgLmAGgkygGY4FQV0IttUg%3D%3D

Mr_SafeMotion · ‎10-25-2022

Hello _ctrlX_TSA, Yes of course, the MTTFd values of ctrlX DRIVE you can find directly inside the SafeMotion application manual in subchapter "Safety characteristics of the safety system" of chapter "Product presentation". https://docs.automation.boschrexroth.com/doc/2929378139/safety-characteristics-of-the-safety-system/latest/en/?sel=IwegDCAs49BMAuMAaUFoXSRkDMQ%3D Kind regrads

Mr_SafeMotion · ‎04-25-2022

Sorry, I have to correct "Drives_Uwe"! It's not possible to upgarde a ctrlX DRIVE Generation 1 hardware X**1-********-***ET******-S02RS********* from Runtime Version 02 (FWA-XD1-AXS-V-02**N-NN.00) to Runtime Version 03 (FWA-XD1-AXS-V-03**N-NN.00). For Runtime Version 03 you need a ctrlX DRIVE Generation 2 hardware X**2-... Kind regards

Mr_SafeMotion · ‎04-25-2022

Hello Richard, ATTENTION: Please note the comment of "macmotor" inside the following chat: https://developer.community.boschrexroth.com/t5/ctrlX-DRIVE/ctrlXdrive-with-MKE-hyperface/m-p/52538 Kind Regards

Mr_SafeMotion · ‎02-10-2022

Two more possibilities: Normaly it should be also possible to parametrize the command parking axis to a local input of the ctrlX DRIVE, and with a bridge to +24V the command will be automaticle startet after rebooting Usage of the ctrlX DRIVE runtime/firmware function "axis simulation". Very helpfull function to simulate the motor including feedback values for your PLC

About Mr_SafeMotion

Re: TPF values of XCS converters and XVE power supplies

Re: MTTF of CtrlX Drive

Re: Firmware update from FWA-XD1-AXS-V-0208N-NN.00 to FWA-XD1-AXS-V-0308N-NN.00

Re: connectors and cables for ControlX drive for motor MKE

Re: Parking axis after reboot