About ham1hel

ham1hel

Network topology: I also attached an image of the configured subnets in ixon and images how the ping looks like from the core and from the PC connected through IXON. It could be something with the IPC firewall but i would expect that when the core receives a ping reply we would also be able to get one through the VPN.

ham1hel

Hello We are using the ixon app on a coreX3 to connect to a machine. Internet connection goes in on XF10 and the machine network is connected on XF51. We have now discovered that one of the devices (PR4) is not reachable from the PC when connecting through IXON but other devices (CML)are the subnet is configured on the ixon as 192.168.142.0 with subnet 255.255.255.0 and gateway to the XF10 adress of the core. We are also able to ping the PR4 from the core but not from the PC and we are able to ping the CML from the PC so the subnet is reachable. does anyone have an idea what might be the issue? We have tried to disable the firewall thinking that was the issue but it seems thats not the case Regards Marcus

ham1hel · ‎08-05-2024

Have tried more than 20times over four weeks but no change. The issue remains that when the company code is entered and the register button pressed within the app, the company code disappears but nothing else happens, register button remains and no device is visible in the ixon portal

ham1hel · ‎06-28-2024

Hello, We have a core where we are using the ixon app. We are currently experiencing an issue, it started with the core not being able to establish a VPN connection(as soon as we tried to connect through the ixon portal it disconnected and then stayed offline) We then did a factory reset of the core and removed the device from the ixon portal. After reinstalling the app and entering the company code the device now stays as unregistered and nothing pops up in the ixon cloud Any idea how this issue might be resolved?

ham1hel · ‎06-12-2024

Hello I've noticed something strange within the datalayer/codesys when using the Util.HOUR Util.HOUR is an alias for a UINT(0..23) but in the datalayer this gets no type whilst a normal UINT gets the type UINT16. So we get the issue that a uint with a specified value range can not be used through the symbol configuration. In this case we bypassed it by simply having a property which returned a UINT instead but is there a specific reason why this does not show properly in the datalayer?

About ham1hel

Re: Issue reaching device on VPN(Ixon)

Issue reaching device on VPN(Ixon)

Re: Issue with IXON device registration

Issue with IXON device registration

Datalayer issue when using utils.HOUR