About bkautzman

bkautzman · ‎04-28-2023

Hello @AllAutomation, Thank you for the information. I will communicate this to the customer.

DvB_Support · ‎04-11-2023

Hello, Firstly, thanks much for enquiring about DeviceBridge Yes the connectivity to TwinCAT 2.11.x.x is possible by having TwinCAT 3 router setup as an intermediate component to establish the ADS connection to TwinCAT in Beckhoff PLCs Please try using the TwinCAT 3.0.4024.10 version for setting up the router using IP. The Beckhoff TwinCAT 2.11 hostname should be reachable through this provided the connection parameters are rightly configured

CodeShepherd · ‎12-05-2022

Also the EtherCat runtime app can be installed and configured in a ctrlX COREvirtual now. Also there is a new mechnism introduce from version 1.16 on, called "Setup" that can be used to create a file for setting up a control as a copy of another: ctrlX CORE WebUI Settings Setup The only change in the data (when using an ctrlX CORE X3), that still needs to be done is to change the PLC target and recompile the code.

bkautzman · ‎10-04-2022

Does this mean that there is an actual difference in the hardware itself? Would you get much better performance from the PROFINET App when using the Multi-Ethernet extension on the ctrlX CorePlus than you would on the ctrlX Core X3 with the Codesys fieldbus libraries? If so, are there benchmarks for what bus cycle times/variable count/connections are possible in each case?

bkautzman · ‎09-07-2022

Thank you!

About bkautzman

Re: SAFEXC.15 PP Output Configuration

Re: TwinCAT 3 Connection

Re: Virtual Control and Real Control Project switching management

Re: ctrlX COREplus with MultiEthernet extension

Re: WebIQ Visualization with integrated VNC Viewer