Hello, You seem to be on the right track here, both ways, downloading via the Remote Manager as well as starting the Designer with the url parameters of the ctrlX Core should work. The following causes are possible: Remote Manager: WebIQ uses the UPNP protocol here, this could be switched off or blocked by the configuration of your operation system. You can enter the WebSocket Url of the ctrlX Core directly in the Remote Manager at the bottom left. The syntax is: 'ws: //192.168.1.1: 10123', if you then click on 'Connect, the connection to ctrlX Core should be possible: You then have to enter the password and you will get to the Project Manager: In your case the right area, Projects in the ctrlX Core, will probably be empty. You can then use the arrow keys in the middle (1) to transfer projects from your local PC to the remote system, i.e. the ctrlX Core and vice versa. If you then mark the project on the right-hand side, you can activate your HMI using the symbols (2) Autostart or (3) Start so that it can be reached via the browser. You have to activate both, (3) the HMI starts immediately, (2) ensures that the HMI is reactivated at the next power-up! Starting HMI with parameters The syntax you specified is correct, but apparently the designer cannot reach the WebIQ server on the ctrlX Core. Please check the following causes of error: Have you installed and activated the WebIQ Server App on your ctrlX Core? Did you use a correct version? o Do your firewall settings allow communication via port 10123? Can you try deactivating the firewall? I hope this statements help you solve the problem and wish you the best success.
... View more