FORUM CTRLX AUTOMATION
ctrlX World Partner Apps for ctrlX AUTOMATION
08-17-2021 02:34 PM
Hello,
my ctrlX Core is only reachable with ipv6 adress. What are the right settings for reaching it with a ipv4 adress (e.g. 192.168.1.1)?
I already deactivated all firewalls.
Greetings
Yannic
Solved! Go to Solution.
08-17-2021 03:42 PM
Are the IP settings of teh PC you want to address the core corrcetly?
If you want to connact to 192.168.1.1/16 teh PC needs to have an IP in the same subnet e.g 192.168.10.12/16 so subnetmask 255.255.0.0
08-18-2021 09:01 AM
Hello,
yes the PC is in the same Subnet. I changed to manual IP settings and set it in the same Subnet. DHCP didn't work too. Someone has any other ideas?
Greetings
Yannic
08-18-2021 09:39 AM
Which software version is installed on your control (e.g. 1.10)? We had some problems with class C networks in the past. The easiest workaround would be to give your control a fitting IP like 192.168.10.1/24 as well as the PC e.g. 192.168.10.12/24.