ctrlX Configurator - Release Notes Version 1.2103.06

[NorbiS]

• Resolved Bugs
• General
• Product Configurators / Solution Configurator
• Downloads
• New Features
• General
• Product Configurators
• Downloads

---

Resolved Bugs

General

• Wrong text colors in info i´s
  ID 260749
  Some of the info i´s in the drive integrated Control Configurator show different text colors.
  
  
• Connections in project missing
  ID 264742
  In a saved and loaded project the connections between the products are missing.
  
  

• Different text sizes in the project list
  ID 269018
  In the project list dialogue, some of the text fields have different text sizes.
  
  

---

Product Configurators / Solution Configurator

• ctrlX DRIVE: Aspect ratio of the drive diagrams
  ID 241651
  In the product details of the drives and servo motors the aspect ratio of the drive diagrams is not correct.
  
  

• ctrlX DRIVE: Gearbox dimensions switched
  ID 244945
  In the dimensions of the gearboxes two parameters are switched.
  
  

• ctrlX DRIVE: MS2N06 servo motors in combination with single-stage gearboxes
  ID 235673
  The MS2N06 servo motors are now only available with single-stage gearboxes in the product configurator.
  
  

• ctrlX DRIVE: Configuration conflict with ATEX
  ID 273965
  In the configuration of the servo motor a configuration conflict shows up, when selecting the characteristic ATEX.
  
  

• ctrlX DRIVE: False motor variant
  ID 276301
  The product configurator selects at a specific torque the wrong motor variant.
  
  

• ctrlX CORE: Order of software license type codes
  ID 258130
  In the Embedded control configurator, the order of the software license type codes is false.
  
  

• ctrlX IPC: Connection of drive integrated Control and IPC
  ID 260498
  In the Graphic View the connection of a drive integrated Control with an IPC is not possible.
  
  

• ctrlX IPC: False characteristic values in remote display
  ID 287149
  The parameter “Display Connection Type” shows too many characteristic values.
  
  

• Solution Drive Set Single Axis
  ID 147606 / ID 163356
  At a specific torque the false motor variant is selected in the solution “Drive set single axis”.
  
  

• Graphic View: Error in Connections downloads
  ID 293675
  In the details dialogue of connections there are wrong downloads shown and the downloads don´t work properly.
  
  

---

Downloads

• False characteristics in the project summary
  ID 252147
  In the project summary the false characteristics are shown for the power supply.
  
  

• False product description in the project summary
  ID 258532
  In the project summary there are false product descriptions for the Embedded control.
  
  

• S20 I/O in CSV
  ID 286570
  The S20 I/O station is not displayed correct in the CSV file. 
  
  

---

New Features

General
 

• Reduced entry points on landing page 
  The entry points to the configurator has been reduced to "Start a new project" and "Edit your project".
  
  

• Rework of the "add products" dialogue
  ID 276429
  The "add products dialogue" has been changed from a modal dialogue to a non-modal hideable sidebar.
  
  

• Product search for material numbers and type codes
  ID 276753
  In the add products area the product search for material numbers and type codes is now available.
  
  

• Support SVG graphics of the drive diagrams
  ID 166176
  The drive diagrams are now displayed as SVG graphics in the details dialogue.
  
  

• Mail address check
  ID 203237
  The text input fields for mail addresses now check the inserted mail on address standards.
  
  

• Warning dialogue when deleting projects
  ID 269027
  When the user deletes a project, there is now a warning dialogue.
  
  

---

Product Configurators

• ctrlX DRIVE: Drive diagrams in German and English
  ID 203053
  The language of the drive diagrams now depends on the selected language in the ctrlX Configurator.
  
  

• ctrlX DRIVE: Configuration with Characteristic Values
  ID 194025
  It is now possible to limit the automatic search of product variants in the configurators of ctrlX DRIVE for drives and motors. By specifying the desired sizes, an accelerated configuration of the desired product by the user takes place.
  
  

• ctrlX DRIVE: Revision of servo motor configurator
  ID 196446
  In the servo motor product configurator new parameters have been added, defaults have been changed and new servo motor variants have been integrated.
  
  

• ctrlX DRIVE: Brake resistors
  ID 206792
  The brake resistors for ctrlX DRIVE are now available in the product configurators.
  
  

• ctrlX DRIVE: Mains filter
  ID 206794
  The calculation of the mains filter for ctrlX DRIVE is updated.
  
  

• ctrlX IPC: Support of PR3 and VR3
  ID 218836
  PR3 and VR3 have been implemented and are now available in the product configurators.
  
  

• ctrlX IPC: Support of PR21
  ID 222821
  PR21 has been implemented and is now available in the product configurator.
  
  

• ctrlX IPC: Web element for operator panel
  ID 248213
  The web element of the option “Operator panel” has been changed from a dropdown to a checkbox.
  
  

• ctrlX I/O
  ID 221713
  The product family ctrlX I/O has been implemented and is now available in the product configurator.
  
  

• Multi-axes solutions
  ID 254905
  The cartesian handling solutions have been updated and changed to more general solutions.
  
  

• Subheadings in product configurators
  ID 260800
  In the product configurators subheadings to group the characteristics are now available.
  
  

---

Downloads

• Support SVG graphics of the drive diagrams in the PDFs
  ID 182993
  The drive diagrams are now exported as SVG graphics into the PDF summaries.
  
  

• Sorting of the project list
  ID 272420
  The sorting of the project list does now update when closed and opened again.