About DevME

DevME · ‎04-18-2023

Hello jacare, unfortunately there is currently no way to do an automatic reconnect of the client. It is a planned for the future. Right now the application needs to take care about the state. In case of disconnect it must call the connect again. Regards

DevME · ‎12-01-2022

Hi Maximilian, The OPC UA Server uses DER encoded certificates and CRLs as required by the OPC UA protocol. Only the private keys are stored as PEM encoded RSA private keys. For manually uploading certificates we have some restrictions with the naming of the certificate which are explained here: https://docs.automation.boschrexroth.com/doc/3485899442/certificate-management/latest/en/ Regards Matthias

DevME · ‎06-13-2022

Hello Hui, I'm not sure if this is really a certificate issue. Because as i saw in your slides you are already connected. The address space of the server is shown (slide 7). To have a more detailed diagnostic it would be helpful to see a log/ trace of the Siemens client. Is this possible? Also there are may some Rexroth server logs inside the Diagnostic Logbook. Have you checked this? Regards Matthias

DevME · ‎08-27-2021

Hi, the configuration of ctrlX OPC UA Client has changed in version 1.10. So first it is necessary to know your version of the app. Best regards!

DevME · ‎08-27-2021

Hi, it is possible to configure the ctrlX OPC UA Server with none Secure Endpoints. The settings can be done via Datalayer or OPC UA. For that you need a configuration like that: Then you need to restart the opc ua server. Best regards!

About DevME

Re: OPC UA Client reconnect

Re: Available certificate format + private key for encrypted OPC UA

Re: Connection between Siemens HMI and ctrlX Core via OPC UA

Re: Connect ctrlX OPC UA Client with Siemens S7 OPC UA Server

Re: Is it possible to disable SecurityPolicy for the OpcUA server?