About Mike_T

Mike_T · ‎08-20-2024

Because of the error message concerning the IP address, we checked the communication settings. We discovered an explenation mark with the message like the example below: After applying the IP address of the control was applied to the date on the control and the problem was solved.

Mike_T · ‎07-11-2024

Hello , When trying to connect to a OPC-UA server with the ctrlC OPC UA Client the connection fails and several errors are shown. When using the UA-Expert tool, the connection is OK and variables are available. Also other OPC Clients are able to connect to the OPC Server. The clocks of the OPC Server and the ctrlX OPC Client are within 3 minutes from each other and we will try to synchronize them to be sure this is not the cause of the problem. Anonymous authentication and no security is used: During several connection attempts, the following errors /messages are shown: The following app versions are installed: Connection with UA Expert is OK: What could we do to solve this problem?

Mike_T · ‎06-10-2024

Last week I performed at test regarding the homing switch configured in the Signal control word. Unfortunataly, the he ctrlX drive with FWA-XD1-AXS-V-0308N-NN.05 still didn't recognize the homing switch when it is configured in the Signal control word. Will this bug be solved in a next release?

Mike_T · ‎03-12-2024

Hello, My customer has the same problem. Is there a known solution? Regards, Mike

Mike_T · ‎01-31-2024

Hello, I have a customer who like to use pipeline animation. He wants to animate the flow of water in the (pipe)line, for examle with moving dots in the direction of the flow. Is this possible in one or more ctrlX HMI app(s)? Regards, Mike

About Mike_T

Re: PLC project save error

ctrlX OPC client connection problem

Re: Drive does not accept the Home switch signal over Ethercat : C0607

Re: PLC not starting on power up

HMI Pipeline animation