About stefanAT_ctrlX

stefanAT_ctrlX · ‎06-07-2021

ok, thank you. When I will make some experiences in the future I will write here what we take and so on.

stefanAT_ctrlX · ‎05-25-2021

Has anybody experience with a fieldbus gateway from CANopen master to ctrlX DRIVE as sercos slave ? Background: 5 XMD (double axis inverter) = 10 axes on a PLC with CANopen master. This seems to be a solution !?: https://www.hilscher.com/de/produkte/produktgruppen/gateways/fuer-den-schaltschrank-ip20/feldbus-gateways/nt-100-re-cos3mcos/?&techCats=3,38&techTypeMaster=1&techTypeSlave=1 Regards, Stefan

stefanAT_ctrlX · ‎03-23-2021

I think you checked with an OPC-UA client e.g. "Unified Automation UaExpert" the namespace ? In my example: Then your namespace should be the right. At ctrlX CORE virtual I use port forwarding with adjustments: 8022:22,8443:443,8740:11740,4840:4840,10123:10123

stefanAT_ctrlX · ‎03-22-2021

Hello Tamer, yes, I've done. But it took me also many hours 😉 I don't know which mistakes I did. But it's working. I just tried again. Here are my adjustments: Yes, as you wrote, to trust the certificate in the CORE (Virtual) was necessary. Regards, Stefan

stefanAT_ctrlX · ‎02-24-2021

If you want an example I made one with PLCopen some months ago. With some pictures.. -> https://developer.community.boschrexroth.com/t5/ctrlX-PLC/PLC-project-using-the-simple-PLCopen-FBs-for-3-axes-1-kinematic/m-p/16610 Maybe you allready saw it . Regards, Stefan

About stefanAT_ctrlX

Re: which Gateway for ctrlX DRIVE as slave to a CANopen master

which Gateway for ctrlX DRIVE as slave to a CANopen master

Betreff: WebIQ IO Manager

Betreff: WebIQ IO Manager

Re: Motion with PLCOpen