About TheCodeCaptain

TheCodeCaptain · ‎02-23-2022

Hi Matthias_Diez, by default no ports are blocked, it only depends on your installed apps on which port a service is listening. By default this is only 443/HTTPS and 2069,2070 for debugging. Other ports will be opened with further apps or rights, like 4840/OPCUA or 22/SSH.

mirasoft · ‎02-22-2022

I had exactly the problem described by CodeShepherd: Old PLC Engineering with PLC App version 1.12.2 and standard license. However, only the update of the PLC Engineer is not enough. Within the project the "Update device" function must be used. Otherwise the problem remains.

TheCodeCaptain · ‎02-03-2022

Hi Servodude, as a ctrlX DRIVE cannot run an app, it would need a converter. Powerlink slave to EtherCAT Master, not sure if such converter is available on the market. An App could run on a ctrlX CORE, but this app needs to implement a Powerlink Slave and copy the values to the EtherCAT Master app and vice versa. Such an app neither exists nor is planned from our side.

TheCodeCaptain · ‎02-02-2022

Hi TK2588, I didn't try it with other devices, but as an import is possible without any warning, it seems no native bindings are used, so should work.

TheCodeCaptain · ‎01-27-2022

Hi AndroidzZ, the winder dancer functionality needs the synchronized motion functionality underneath. This is currently under development and planned for middle of the year. The function blocks for winder etc. will follow afterwards.

About TheCodeCaptain

Re: What are default ports without firewall app?

Re: Multi-core licence missing - PLC app

Re: Powerlink converter

Re: ctrlX CORE - Node Red & BACnet

Re: Winder dancer functionallity