About TheCodeCaptain

TheCodeCaptain · ‎10-06-2021

Hi AndroidzZ, MQTT is not realtime capable. You can read and write the realtime IOs of the ctrlX CORE, but not in realtime. Regards

TheCodeCaptain · ‎09-14-2021

Hi aFouraker, did you also purchase a license from Codesys or just the extension package? The feature is not for free. On my PC it is working with the version ctrlX WORKS 1.10 and a license.

TheCodeCaptain · ‎09-07-2021

Hi ctrlXnovo, not in the datalayer, but what about this "https://192.168.1.1/systeminfo/systeminfo" ?

TheCodeCaptain · ‎09-06-2021

Hi ChickenTeriyaki, for the future you should not use the same subnet on your EtherCAT like you have on your engineering ports. To access it again you could try the IPv6 link local address. If you cannot see the control in ctrlX WORKS and also not in your Windows Network Environment you could try to type the address manually. Based on your screenshot it should be [fe80::260:34ff:fe86:c462] You can paste this, with the [] brakets in the address bar of your web browser

TheCodeCaptain · ‎09-01-2021

Hi giustola69, the systemreport shows that you use an old 1.8 version of motion and plc, please update those and try it again.

About TheCodeCaptain

Re: MQTT real time acces in CORE I/O

Re: Version Control - SVN or GIT

Re: Monitoring internal temperature of processor

Re: No connection to CORE after change in Virtual Ethernet Port

Re: Couldn't go online with the PLCapplication on a new Virtual Machine