About Naz

Naz

Hi, I've been having trouble logging into ctrlX Core recently. I was able to log in on the first day without any issues, but when I returned the next day, I started encountering errors labeled "unresolved reference." Just for context, I can log into the core with an empty project that only contains visualization and WebVisu. However, as soon as I add code (CXA_PlcOpen), the error reappears. I'm using ctrlX Works version 1.2.11, and the core system is version 1.2.3. I'm not sure if these version differences are related to the issue. Please see attached file.

Naz · ‎10-01-2024

Hi Thom, It looks like you're using a different version. You need version 2.6 instead of 1.20. You can download the required version from the Collaboration Rooms. Basically that the core system image is separate from the apps installed on it. This means you can either update the core to version 2.6 or install the version 1.2 apps on the current core system. Hope this helps.

Naz · ‎09-25-2024

Hi @ZYL_02, There is already a visualization for jogging the axis in the MotionInterface folder. I’m just wondering if this UI-Gcode has been used on an actual working machine (Customer Machine). I’m asking because I presented it to a customer, and they found it too simple compared to more advanced CNC systems. I’m also not very familiar with Node-Red.

Naz · ‎09-18-2024

Hello, I would like to know how easy it is to modify the Node-Red and PLC code. For example, adding a manual (Jog axis) or auto mode, etc. Additionally, is there a guide that explains the PLC code? Thanks

Naz · ‎09-10-2024

Hi Dias, Here's the System info, I'm using 1.7.6 ctrlx Safety Engineering.

About Naz

Unresolved Reference

Re: The EtherCAT Master app is currently not available (Error: 404).

Re: How to use G-Code UI on ctrlX CORE

Re: How to use G-Code UI on ctrlX CORE

Re: ctrlX Safety Engineering remote access to SAFEX-C1x via EoE (Engineering over Ethercat...