About Joonas

Joonas · ‎09-06-2024

Apologies for the late reply. It seems that the changes in the parameter file had no effect; it was just a coincidence. For now, it appears that the solution was to remove the incorrectly sized choke from the system.

Joonas · ‎06-28-2024

Hi, During commissioning of a machine mains fuse occassionally blew when XG31:3 got the signal to start loading DC bus (P-1720.0.150). Configuration is pretty similar to the picture with XCS/XMD/XMS. After changing "Reaction to DC bus undervoltage" settings from E2026 to F2026, this problem no longer occured. I have no idea why this would have such an effect, so all suggestions are welcome.

Joonas · ‎06-17-2024

Hi, What is the endpoint to read SFK graph values via REST? I've managed to get Position / Force values of the graph, but I need the X:Y values as time:force. Any suggestions how to accomplish this? Picture of what I want to read: Also where can I find documentation that describes the endpoints? There is no mention of the curves in the API documentation. Thanks you!

Joonas · ‎05-28-2024

Is there documentation such as R911342562 that covers security features of ctrlX SAFEX-C controllers?

Joonas · ‎04-19-2024

Hi, It seems that we have the same issue. setup: Virtual core image 1.20.12 NX MCD 2206 All security settings enabled. certificates trusted on both sides. NX user reported that they managed to connect with Matrikon OPC UA explorer to the OPC UA server. Ctrlx user has administrative rights On the client side (NX), authentication mode is username & password. Time settings: It seems that with incorrect time settings rejected session count and security rejected count increase with every attempt to connect. After changing the time on ctrlX side to match windows’ time, this was fixed. However, the client still refuses to connect but now rejected request count keeps increasing with every connection attempt. Nothing appears on the diagnostic logbook, even with trace messages enabled. I do not have Siemens license on my own PC, so testing this is a bit difficult. I can ask the end user to check if there are any configurable time settings on the NX side and verify that the OPC UA connection established with Matrikon OPC UA explorer really works. Any other suggestions what should be checked?

About Joonas

Re: DC bus error reaction settings

DC bus error reaction settings

Smart Function Kit REST API

ctrlX Safety security

Re: OPC UA connection via NX CAM