About TheCodeCaptain

TheCodeCaptain · ‎02-12-2021

Hi AndroidzZ, maybe you are in the "Service Mode". Klick to the Menu "Install an app" and check if there is a button "Operation Mode" and klick it.

TheCodeCaptain · ‎02-02-2021

Hi jaquaree, here you can find a lot information about building snaps and how snaps work. As far as I know there is no converter available, also the technique behind is a bit different. https://snapcraft.io/tutorials

TheCodeCaptain · ‎02-02-2021

Hi jaquaree, yes, it is possbile to run the ctrlX CORE in Realtime while Docker is also running. We will provide with the march release a prepared Docker Runtime App which allows you to pack your Docker containers in Snaps and run it on the ctrlX. Also some examples how you pack a Docker Image in a Snap and start everything will be provided, this is done via Docker Compose File within your Snap. Best Regards

TheCodeCaptain · ‎09-03-2020

Hi Stefan, in this way you can only start and open the ctrlX DRIVE Engineering Version you installed together and via your ctrlX WORKS installation. A seperate installed version has to be started manually. Best regards

TheCodeCaptain · ‎09-03-2020

Hi, you can upgrade all your apps to the latest version 1.4.x, you can download it via the collaboration room. https://www.boschrexroth.com/en/web/xc/myrexroth/share/files Update order as following: Note, if you have a drive integrated CORE it is a must to update first the drive firmware Login to the ctrlX CORE controller and switch to menu "Configurations" Save all data on the controller by using the "Save" button. Save your relevant configuration(s) by selecting them in the overview and press button "Save to PC". Switch to menu "Settings" → "Apps" and select TAB "Local storage" Uninstall all the User Apps (e.g. PLC, Motion, EtherCAT,...) Reboot your ctrlX CORE controller, log in and switch to menu "Settings" → "Apps" and select TAB "Local storage" Select the "settings" symbol and activate "Allow installation from unknown source" Installing system apps. Wait until installing an app is completed Load "Device Admin XCR-V-0104.3.app". After loading rexroth-deviceadmin 1.4.3 is listed in the overview. Press button "Install". After installation update browser window by pressing Strg+F5! Press button "Service Mode" Load "snapd_2.45.1.app". After loading snapd 2.45.1 is listed in the overview. Press button "Install". Load "core_16-2.45.1.app". After loading core 16-2.44.3 is listed in the overview. Press button "Install". Updating "core18_20200427.app", if it is necessary Load "Gadgets (Boot Loader, FPGA, ...) XCR-V-0104.1.app". After loading rexroth-arch01-hw 1.4.1 is listed in the overview. Press button "Install". Load "Automation Core XCR-V-0104.0.app". After loading rexroth-automationcore 1.4.0 is listed in the overview. Press button "Install". Load "Solutions XCR-V-0104.0.app". After loading rexroth-solutions 1.4.0 is listed in the overview. Press button "Install". Load "Linux Kernel XCR-V-0104.0.app". After loading rexroth-arch01-kernel 4.19.127-rt55-icx31 is listed in the overview. Press button "Install". Update your browser window by pressing Strg+F5 Install application apps (Also necessary after updating via rescue system. in this case press button "Service Mode" before) Load "EtherCAT Master ECM-V-0104.0.app". After loading rexroth-ethercatmaster 1.4.0 is listed in the overview. Press button "Install" or "Update". Load "PLC PLC-V-0104.1.app". After loading rexroth-plc 1.4.1 is listed in the overview. Press button "Install"or "Update". Load "Motion MOT-V-0104.0.app". After loading rexroth-motion 1.4.0 is listed in the overview. Press button "Install"or "Update". Load and install all other needed apps Press button "Operation Mode" Restart your ctrlX CORE controller. Maybe some automatic restarts will occur to complete the update Log in to controller and check, if all therelevant Apps are shown in the Automation overview and the menu on the left side! Load your configuration(s) to the controller and activate the desired one

About TheCodeCaptain

Re: i keep getting logged out after several minutes

Re: Is there a tutorial from dockerfile to snapcraft.yaml?

Re: Is it possible to run the ctrlX Core in Realtime while Docker is also running?

Re: ctrlX DRIVE Engineering 1.06 (1.6.1) start automatically instead of 1.04

Re: Error in User Permission Group