About MrAdam1983

MrAdam1983 · ‎06-14-2023

where do i pull a system report from? under diagnostics, looking at the logbook; I wasn't ware that I had to set logs to persistant, I don;t have any entries older than the 13th. The lockup occured sometime between the 9th and 12th. Not sure where to see utilization either, My memory is running high, I have .04GB free if 1.95GB but that is a with a buffer of 1.21GB so I assume that is normalish? CPU is is a bit uneven Cores 0 and 1 stay around 7.5% While Core 2 is around 8.5%, and Core 3 is down around 3.8%. but I don't really know how those are utilized. Looking at my apps, everything is current to 1.20, except the IDE at 1.18.29 which was included with the Core 1.20 update. OPC UA Client mathes the Collaboration room at 1.12.4, and DeviceBridge was updated a few weeks ago to 3.2.8.

MrAdam1983 · ‎06-14-2023

Core UI is not reachable, so i cannot get to the installed apps or any other part of the Core. I have a button on the HMI to connect and disconnect the VPN, I also have a status coming back to show me the state of the VPN connection. The HMI Function of the button stills works in this condition, but the VPN status never changes and the VPN never connects; this indicates to me that nothing at the datalayer is responding.

MrAdam1983 · ‎06-13-2023

I have noticed this twice now, the last two week, When I come back into work after the weekend the unit is showing a red flashing light and unreachable through a web browser. The WebIQ application is still running on the HMI and can be restarted; but I am not able to connect the VPN (from an on screen button). A reboot resolves the error, the unit is reachable through a browser and the VPN screen control works again. core is running 1.20

MrAdam1983 · ‎06-02-2023

Sgilk - your link is not working. Am I reading these responses right in that we cannot change the appearance of a button based on a tag value? We use a two tag structure that gives us logic diagnostics instantly on the button. We send a command through the first tag and look at a second tag for a status feedback; that feedback is based on whether or not the logic completes. If the logic does not complete then the button does not "Light" indicating something did not complete. That is a standard push button, on multistate indicators we do the same to indicate a selected function but only once the logic completes. This, to me, seems like a pretty standard function. It may seem like overkill but you would be suprised how much it reduces claims such as "the HMI doesn't work" and it can also prompt operators to make sure all of the conditions are met.

MrAdam1983 · ‎05-23-2023

i will add that I am also seeing this behavior on a 3x with 1.20 and WebIQ 2.13.0. good to see I am not alone and that it is being investigated.

About MrAdam1983

Re: x3 Core unresponsive with red flashing status light.

Re: x3 Core unresponsive with red flashing status light.

x3 Core unresponsive with red flashing status light.

Re: Changing text on a button based on a tag

Re: HMI freezes after Update