About KevinD

KevinD · ‎07-19-2023

Hi Sgilk, Thanks a lor for your reply ! I'm not at all familiar with the library versions or the CtrlX Core version. I tried to open your application but I get the following errors: If I press Ignore, I get this : and since I installed the libraries you recommend, I get errors in my project when I compile: I've try to follow this tuto : https://developer.community.boschrexroth.com/t5/Store-and-How-to/Update-and-setup-ctrlX-CORE-with-a-microSD-card/ba-p/76638#toc-hId-175047749 but I can't acces the collaboration room Can you help me to update properly? I've try other solution from internet like this : but RTS_SYSTIMEDATE is empty EDIT : I manage to get the Weekday with this formula : I would still like some help with the update 🙂 Thanks, Kevin

KevinD · ‎07-13-2023

Hello, I'm trying to retrieve the weekday name or number from a date. For now I can get the current date and time and extract the time of day. But I would also like to know the name or number of the day, to be able to trigger different actions during the week or the weekend. I have already tried several solutions (formulas with modulo) or several libraries but either the day is not correct or I get an error. for example: with this code: DayIndex := DTU.GetDayOfWeek(dtDate:=CurentDate , peError:=dateError ); I get this error: Can anybody help me? PS: where does the value retrieved by the function: SysTimeRtcGet come from? Is there a way to sync it to the server time? there is a 7 minute difference between the 2 Thanks, Kevin

KevinD · ‎01-29-2023

It's in order, I can connect to the CtrlX again, I don't know if it had to do with node-red. By disconnecting the XF10 port, the CtrlX was able to turn green. I was able to connect via port address XF51. I then changed the IP address of the XF10 port and since then I can reconnect. Do you know where the problem could come from? there was nothing else on the network with the same ip address

KevinD · ‎01-29-2023

Hello, I have a big problem with the CtrlX, since yesterday when I added elements in node-red, I could deploy but later, some elements were deleted by themselves from flows. With a "review change" message appearing and telling me that a lot of items had been deleted, Today, I tried to redeploy the backup I made of node-red. the deployment went well but some time later I couldn't connect to the CtrlX anymore. It restarts continuously, goes blue then green then red and restarts in a loop. We are on a very urgent project and we need it up and running as soon as possible, can anyone help us? Do you think the problem is because I loaded too many items in node-red? Is there a way to monitor memory? I saw on other post that it was possible to do a factory reset from the sd card but I can't find the files on the site. Thanks for your help, Kevin.

KevinD · ‎01-27-2023

Hi Sheperd, Thanks for your reply,it works now. I had some problems, but it must have been due to a poor knowledge of Ethercat. It is the first time that I work with this bus. Can you explain the basic best practices to me? I tried to connect another device to configure it. But it's not possible by disconnecting the rest of the network right? With other buses, if slaves are missing it does not matter, we can still configure other slaves, but with Ethercat it automatically takes the address of another module? Can you confirm? Does an industrial switch that works for Profinet also works for Ethercat or do we have to use specific switches for Ethercat? If I understood correctly each time I want to add a slave, all the slaves must be connected, I must pass the master in Pre-Op, then connect the new slave. Scan device, add slave, load config and go back to OP? Thanks, Kevin.

About KevinD

Re: Weekday

Weekday

Re: CtrlX core restart continously

CtrlX core restart continously

Re: Ethercat error when new device added on the bus