About ArcherThompson

ArcherThompson · ‎07-06-2023

I am experiencing an issue across several devices where the Drive Connect App is often times using 60-80% of by GPOS cores on the X3. This is without any apps requesting the data, and seems to occur no matter the operational state. Drives are setup for Sercos 3 This system has 9 drives.

ArcherThompson · ‎05-30-2023

I am sing Drive Connect to view drive information, I currently can only see 2 of 7 drives. Normally this works but not on this machine. Info: versions tried 1.12, 1.16, 1.18 Drives are controlled via anouther device over sercos The core is connected to last drive I have checked all the cabling but the master sees everything so its not that. I am at a bit of a loss here.

ArcherThompson · ‎03-31-2023

Nick, Interesting I seem to recall being able to ping before, I did find yesterday that a curl command worked as does wget. My root issue is suddenly I can not connect to the datalayer on my test bench, So that is what kicked off trying to ping the device and so on. I appericiate the insight.

ArcherThompson · ‎03-28-2023

I am using ctrlX Works 1.18.1 and had been working in an app build enviroment for several weeks, I was always able to ping other devices on my host machines LAN and had internet access, then I booted it up the other day and suddenly I can not access anything even on my LAN. I receive the following message "From 10.0.2.2 icmp_seq=1 Destination Port Unreachable" my host can ping this device, and nothing apperent has changed and I am a bit stuck on how to trace down the issue here. Addtionally I created a new enviroment and faced the same issues, I then had a team member try on there computer and they seem to have the exact same issue. It would therefore appear to related to something our System admin has changed but so far we have no been able to locate what exactly is the issue. Is there anyone that could provide some guidance? Thank you

ArcherThompson · ‎02-28-2023

while building a dotnet app I noticed all the .yaml files in the examples use: apps: app: ....ect parts: app: ....ect Note that <app> showld be replaced with your command name for best practice (to the best of my knowledge although documentation is limited) apps: my-app: ....ect parts: my-app: ....ect not doing so will give an error when you try and run that snap: error: cannot find app "<your app command>" in "<your app name>" *note this does not prevent you from running but make it much harder to troubleshoot.

About ArcherThompson

DC 18, 20, and 20.1 all using 60-80% of GPOS CPU cores

Drive Connect does not find all drives

Re: Guidance on Destination Port Unreachable in app build enviroment

Guidance on Destination Port Unreachable in app build enviroment

dotnet snapcraft.yaml problem/solution => error: cannot find app